Trades and Industries of Rye

Ship Building

The Shipbuilding Industry in Rye and the estuary of the River Rother, together with the manifold trades required to meet maritime requirements, has since time immemorial undergone phases of boom and depression. Its varying fortunes have been brought about or accentuated by physical changes in the Harbour, by wars, by technological developments and by trends in the national economy.

In the Middle Ages two factors were immensely favourable to shipbuilding in the Rother estuary, neither of which can be said to obtain today. The first was the ready supply of timber from the forest of Andredsweald and the second was the navigability of the rivers Rother, Brede and Tillingham.

There is firm evidence of shipbuilding in Rye in the form of a royal order of 1223 which forbade the export of timber because the King (Henry III) was proposing to build ships and galleys. Eight years later Winchelsea (i.e. the old port before being evacuated) was ordered to send a carpenter for the King’s ship at Portsmouth. Between 1237 and 1243 the King’s galleys were lying at Rye and Winchelsea and in the last year seven were laid up in Rye. By this time Rye and Winchelsea had royal dockyards and storehouses which were essential both to meeting the considerable fishing requirements of the royal household and also for supporting overseas trading which extended to the Spanish coast.

Repairs to the King’s galleys were carried out at Rye in 1252 and again in 1253. In 1294, following a typical engagement in the Channel with the French, general preparations for the defence of the English coast were made known and the King (Edward I) ordered two galleys of 120 oars to be built at the new town of Winchelsea. This was only six years after old Winchelsea had been completely evacuated so little time had been lost in re-establishing the reputation of Winchelsea shipwrights. Out of 10 ports including London only Winchelsea and Bristol were given orders for more than one galley.

When the Hundred Years War with France started in 1337 Rye was building at least four ships which were to form an important part of the Cinque Ports Fleet. They were ‘La Michael’ (244 tons), ‘La Nicholas’ (120 tons) ‘La Palmere’ (60 tons) and ‘La Edmond’ (60 tons). These square rigged ships with stern-mounted rudders and forecastles and after castles at bow and stern are well depicted on the seals of the Cinque Ports. The ‘La Michael’ was the largest English vessel to take part in the battle of Sluys near Blanckenberg in 1340, during which bowmen firing from the high decks were able to kill hundreds of the enemy before fighting between the boarding parties even began.

Further up the Rother River shipbuilding was taking place at Small Hythe which served as the port for Tenterden. In 1420 under the auspices of the King (Henry V), a 120 ton ballinger (a clinker-built two masted ship) was built at Small Hythe by William Catton who had the title of ‘Keeper of the King’s Ships.’ Catton is also accredited with the building at Winchelsea of the 1000 ton ‘Jesus’ which was the second largest ship in Henry V’s fleet.

By the middle of the 15th. century there were unmistakable signs that the natural advantages which Rye and Winchelsea shipbuilders derived from the forested hinterland and the navigable rivers flowing down from Sedlescombe (on the Brede) and Bodiam (on the Rother) were diminishing. The iron furnaces of the Weald using water power for smelting had been devouring trees so rapidly that timber for shipbuilding was becoming relatively scarce. Rather late in the day there was legislation (in 1558) prohibiting the use of timber in the furnaces. At the same time geo-physical changes were taking place in the Rother estuary which spelt difficulty and even disaster for some shipbuilders.

The sea, having overwhelmed old Winchelsea at the end of the 13th. century, now proceeded to build up a bar in the new port causing the River Brede to become increasingly narrow and shallow, and enabling acres of land formerly part of the. tidal lagoon to be ’inned’, i.e. reclaimed for agriculture. In consequence, well before the end of the 15th. century, Winchelsea’s shipbuilding industry had ceased to exist. If there were expectations that Rye shipbuilding would benefit from the demise of Winchelsea such hopes were not fulfilled. Even for the purposes of the Agincourt campaign in 1415, the King (Henry V) had to supplement his fleet by hiring transports from Holland and Zealand.

The practice of ’inning’ which had brought about the closure of the Port of Winchelsea was also affecting navigation in the upper and middle reaches of the Rivers Rother and Tillingham. The consequential adverse effects on shipping interests were further aggravated by the fitting of merchant ships with guns above the bulwark rail. Such ships had to be deep draught to maintain stability and were therefore quite unsuited to the shoals and shallows of Rye Harbour. Nor could it have been easy for Rye shipbuilders to change from clinker planking construction to carvel as became necessary when water-tight gunports had to be cut close to the water line. Men of war now began to be differentiated from merchantmen and with the reign of Henry VIII the era of impressment of ships came to an end.